Dell Precision 3460 Small Form Factor User Manual

Steps
1. Align the notch on the memory with the tab on the memory-module slot.
2. Slide the memory firmly into the slot and press the memory module down until it clicks into place.
NOTE: If you do not hear the click, remove the memory module and reinstall it.
3. Close the memory module door and press down firmly till it clicks in place.
Next steps
1. Install the hard-drive and optical-drive cage.
2. Install the 3.5-inch hard-drive.
3. Install the 2.5-inch hard-drive.
4. Install the front bezel.
5. Install the side cover.
6. Follow the procedure in after working inside your computer.
Hard-drive and optical-drive supporting bracket
Removing the Bay support bracket
Prerequisites
1. Follow the procedure in before working inside your computer.
Removing and installing components
41

Dell Precision 3460 Small Form Factor Specifications

General

Brand	Dell
Model	Precision 3460 Small Form Factor
Category	Desktop
Language	English