Keyboard lattice and Keyboard
Removing the keyboard trim
1. Follow the procedure in Before working inside your computer.
2. Pry the keyboard trim from the edges [1] and lift it away from the computer [2].
NOTE: You may need a plastic scribe to pry the keyboard trim from the edges.
Removing the keyboard
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. base cover
b. battery
c. keyboard trim
3. Lift the latch, and disconnect the keyboard cable [1], touchpad cable [2], trackstick cable [3] and back light(optional) [4]
from the connector.
Disassembly and reassembly
21
To Next Page
Loading...
