Dell Precision 3520 - Installing the Display Hinge

d. hinge cap
e. display assembly
f.
3. To remove the display hinge:
a. Remove the M2.5x3.5 screws that secure the display hinge to the display assembly [1].
b. Lift the display hinge away from the display assembly [2].
c. Repeat the to remove the other display hinge.
Installing the display hinge
1. Place the display hinge cover on the display assembly.
2. Tighten the M2.5x3.5 screw to secure the display hinge cover to the display assembly.
3. Repeat the same procedure step 1-2 to install the other display hinge cover.
4. Install the:
a.
b. display assembly
c. hinge cap
d. WLAN card
e. battery
f. base cover
5. Follow the procedure in After working inside your computer.
Disassembly and reassembly
43