Display panel
Removing the display panel
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. base cover
b. battery
c. WLAN card
d. hinge cap
e. display assembly
f.
3. Remove the M2x3 screws that secure the display panel to the display assembly [1] and lift to turn over the display panel to
access the eDP cable [2].
4. To remove the display panel:
a. Peel off the adhesive tape [1].
b. Lift the blue tape that secures the display cable [2].
c. Lift the latch to disconnect the display cable from the connector on the display panel [3, 4].
44
Disassembly and reassembly
To Next Page
Loading...
