e. hinge cap
f. display assembly
g. display bezel
h. display panel
3. To remove the camera:
a. Disconnect the camera cable from the connector [1].
b. Lift the camera away from the display [2].
Installing the camera
1. Place the camera on the display assembly.
2. Connect the camera cable to the connector on the display assembly
3. Install the:
a. display panel
b. display bezel
c. display assembly
d. hinge cap
e. WWAN card
f. WLAN card
g. battery
h. base cover
4. Follow the procedure in After working inside your computer.
Disassembly and reassembly
47
To Next Page
Loading...
