Dell Precision 3520 - Installing the Display Bezel; Display Hinges; Removing the Display Hinge

CAUTION: There is a very strong adhesive on the back of the bezel that seals it to the LCD, this can take
some force to pry apart from the LCD, care needs to be taken when removing the bezel that the LCD is not
damaged
Installing the display bezel
1. Place the display bezel on the display assembly.
2. Starting from the top corner, press on the display bezel and work around the entire bezel until it clicks on to the display
assembly.
3. Install the:
a. display assembly
b. hinge cap
c. WWAN card
d. WLAN card
e. battery
f. base cover
4. Follow the procedure in After working inside your computer.
Display hinges
Removing the display hinge
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. base cover
b. battery
c. WLAN card
42
Disassembly and reassembly