Installing the speaker
1. Place the speakers into the slots on the .
2. Route the speaker cable through the retention clips through the routing channel.
3. Connect the speaker and LED board cable to the .
4. Install the:
a. chassis frame
b. SSD card
c. WLAN card
d. battery
e. base cover
5. Follow the procedure in After working inside your computer.
Display hinge cover
Removing the display hinge cover
1. Follow the procedure in Before working inside your computer.
2. To remove the hinge cover:
a. Remove the M2x3 screws that secure the hinge cover to the [1].
b. Remove the hinge cover from the [2].
Disassembly and reassembly
37
To Next Page
Loading...
