Installing the WLAN card
1 Insert the WWAN card into the slot on the laptop.
2 Place the M2x3 screw to secures the WWAN card to the system board.
3 Connect the WWAN cables to the connectors on the WWAN Card.
4 Install the:
a battery
b base cover
5 Follow the procedure in After working inside your system.
Coin-cell battery
Removing the coin cell battery
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
3 To remove the coin cell battery:
a Disconnect the coin cell battery cable from the connector on the system board [1].
b Pry the coin cell battery to release from the adhesive and lift it away from the system board [2].
22
Disassembly and reassembly
To Next Page
Loading...
