Installing camera
1 Insert the camera into the slot on the display back cover.
2 Connect the display cable to the connector.
3 Connect the camera cable to the connector on the camera module.
4 Install the :
a display panel
b display bezel
c display assembly
d WLAN
e WWAN card
f memory module
g battery
h base cover
5 Follow the procedure in After working inside your computer.
Display back cover assembly
Removing the display back cover assembly
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c WWAN card
d WLAN card
e display assembly
f display bezel
g display panel
h eDP cable
i camera
3 The display back cover assembly is the remaining component, after removing all the components.
Disassembly and reassembly
53
To Next Page
Loading...
