Installing the speaker
1 Place the speakers into the slots on the laptop.
2 Route the speaker cable through the retention clips through the routing channel.
3 Connect the speaker and LED board cable to the laptop.
4 Install the:
a chassis frame
b SSD card
c WLAN card
d battery
e base cover
5 Follow the procedure in After working inside your computer.
Hinge cap
Removing the hinge cap
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
3 To remove the hinge cap:
a Remove the M2x3 screws that secure the hinge cap to the laptop [1].
b Remove the hinge cap from the laptop [2].
42
Disassembly and reassembly
To Next Page
Loading...
