f display assembly
g display bezel
3 To remove the display hinge:
a Remove the M2.5x3.5 screws that secure the display hinge to the display assembly [1].
b Lift the display hinge away from the display assembly [2].
c Repeat the to remove the other display hinge.
Installing the display hinge
1 Place the display hinge cover on the display assembly.
2 Tighten the M2.5x3.5 screw to secure the display hinge cover to the display assembly.
3 Repeat the same procedure step 1-2 to install the other display hinge cover.
4 Install the:
a display bezel
b display assembly
c hinge cap
d WWAN card
e WLAN card
f battery
g base cover
5 Follow the procedure in After working inside your computer.
48
Disassembly and reassembly
To Next Page
Loading...
