Dell Precision 3530 - Installing the Display Panel

Installing the display panel
1 Connect the eDP cable to the connector and ax the blue tape.
2 Ax the adhesive tape to secure the eDP cable.
3 Replace the display panel to align with the screw holders on the display assembly.
4 Tighten the M2x3 screws to secure the display panel to the display assembly.
5 Install the:
a display bezel
b display assembly
c hinge cap
d WWAN card
e WLAN card
f battery
g base cover
6 Follow the procedure in After working inside your computer.
50
Disassembly and reassembly