Installing the hinge cap
1 Place the hinge bracket to align with the screw holders on the laptop.
2 Tighten the M2x3 screws to secure the display assembly to the laptop.
3 Install the:
a battery
b base cover
4 Follow the procedure in After working inside your computer.
Display assembly
Removing the display assembly
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c WWAN card
d WLAN card
e hinge cap
3 To disconnect the display cable:
a Release the WLAN cable from the routing channels [1].
Disassembly and reassembly
43
To Next Page
Loading...
