b Remove the M2x3 screws (2) and lift the metal bracket that secure the display cable on the computer [2,3].
c Disconnect the display cable [4].
4 To remove hinge screws:
a Remove the M2x5 screws (4) that secure the display assembly to the system board [1].
b Release the antenna cables and display cable from the routing channel [2, 3].
5 Turn over the laptop.
6 To remove the display assembly:
a Remove the M2x5 screws (2) that secure the display assembly to the laptop [1].
b Flip to open the display [2].
44
Disassembly and reassembly
To Next Page
Loading...
