Dell Precision 3640 Tower - Removing the 2.5-Inch Hard Drive

2. Slide the hard drive assembly into the hard drive bay [1].
3. Connect the data cable and the power cable to the hard drive [2].
4. To install additional hard drive, follow the steps from 1 to 3.
5. Install the cover.
6. Follow the procedure in After Working Inside Your Computer.
Removing the 2.5-inch hard drive
Steps
1. Follow the procedure in Before Working Inside Your Computer.
2. Remove the cover.
3. Disconnect the data cables and the power cables from the respective connectors on the hard drives [1].
Disassembly and reassembly
27