6. Unroute the system fan cable from the routing channel on the system-fan bracket [1].
7. To release the system fan from the bracket, pull the rubber grommets and remove the grommets securing the system fan to the
bracket [2].
8. Lift the system fan off the system-fan bracket [3].
Figure 16. Removing the chassis fan
Installing system fan
Steps
1. Insert the rubber grommets through the holders on the system-fan bracket, align the system fan holes with the rubber grommets and
insert the rubber grommets through the holes on the system fan to secure the system fan to the bracket [1].
2. Route the system fan cable through the routing channel on the system-fan bracket [2].
82
Disassembly and reassembly
To Next Page
Loading...
