Speaker
Removing speaker
Steps
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. Cover
b. PSU hinge
3. To remove speaker for system shipped with system configuration :
a. Disconnect the speaker cable from the system board [1].
b. Unroute the speaker cable from the tabs on the system board [2,3].
c. Press the release tab and pull the speaker out from front of the system chassis [4].
Installing the speaker
Steps
1. To install speaker for system :
a. Replace the speaker into the rear portion of the chassis above the front fan [1].
b. Route the speaker cable along the tabs on the I/O port of the system board [2,3] and connect it to the system board [4].
Disassembly and reassembly
39
To Next Page
Loading...
