Memory module
Removing the memory module
Steps
1. Follow the procedure in Before Working Inside Your Computer.
2. Remove the Cover.
3. Press the memory module retention tabs on each side of the memory module [1].
4. Lift the memory module out of the connectors on the system board [2].
Installing the memory module
Steps
1. Align the notch on the memory module with the tab on the memory module connector.
2. Press the memory module until the retention tabs clicks into place.
3. Install the cover.
4. Follow the procedure in After Working Inside Your Computer.
38
Disassembly and reassembly
To Next Page
Loading...
