8. Flex the hard drive bracket [1], lift the hard drive [2], and then slide out from the hard drive bracket [3].
NOTE: Follow the same procedure to remove another hard drive on the other side of the bracket.
Installing the 2.5-inch hard drive
Steps
1. Insert the holes on one side of the hard disk into the pins on the hard drive bracket [1], and then place the hard drive into the bracket
such that the pins on other side of the bracket is aligned with the holes on the hard drive [2].
NOTE: Follow the same procedure to install another hard drive on the other side of the bracket.
Disassembly and reassembly 29
To Next Page
Loading...
