3. Insert the tab on the PCIe card holder into the slot on the chassis [2] and press until it is secured to the graphics card [3].
4. Close the PSU hinge.
5. Connect the VGA power cables to the dual graphics card configuration:
a. Unroute the VGA power cables from the securing tabs on the PSU [1].
b. Lift the plastics latch to free the cables [2].
c. Connect the VGA power cables to the connectors on both the graphics card [3].
6. Install the Cover.
7. Follow the procedure in After working inside your computer.
Disassembly and reassembly
37
To Next Page
Loading...
