Dell Precision M6500 - Removing the Memory Module(S); Replacing the Memory Module(S)

Back to Contents Page
Memory
DellPrecision™WorkstationM6500ServiceManual
Removing the Memory Module(s)
1. Follow the procedures in Before Working Inside Your Computer.
2. To remove the memory modules C and D, remove the battery and the access panel.
To remove the memory modules A and B, remove the battery, hinge cover, and keyboard.
3. Carefully spread apart the securing clips on each end of the memory module connector until the memory module pops up.
4. Remove the memory module from the connector.
Replacing the Memory Module(s)
To replace the memory module(s), perform the above steps in reverse order.
Back to Contents Page
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: You may need to install Adobe®Flash®Player from Adobe.com in order to view the illustrations below.