Dell Precision M6500 - Removing the Keyboard; Replacing the Keyboard

Back to Contents Page
Keyboard
DellPrecision™WorkstationM6500ServiceManual
Removing the Keyboard
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the battery.
3. Remove the hinge cover.
4. Remove the four screws that secure the keyboard to the computer.
5. Slide the keyboard towards the display to disconnect it from the system board.
6. Remove the keyboard from the computer.
Replacing the Keyboard
To replace the keyboard, perform the above steps in reverse order.
Back to Contents Page
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: You may need to install Adobe®Flash®Player from Adobe.com in order to view the illustrations below.