Installation and Setup Index
Index-2
M
member
default gateway
3-1
naming 3-1
netmask 3-2
network address 3-1
RAID policy 3-7
N
netmask, member setting 3-2
network
array IP address
3-1
configuring multiple interfaces 5-1
group IP address 3-2
improving performance 2-2
recommendations 2-2
requirements 2-2
network cables 2-9
connecting 2-9
network configurations 2-9
network interfaces
configuring
3-2
network requirements 2-9
NTP server, configuring 5-1
P
power cables 2-8
power requirements 2-5, 2-8
power, turning on 2-12
powering on 2-12
PS Series array
increasing bandwidth
2-2
multipath I/O recommendation 2-2
network recommendations 2-2
network requirements 2-2
protecting from discharge 2-1
subnet access recommendation 2-2
R
rack mount requirements 2-7
RAID levels, supported 3-7
RAID policy
description
3-7
setting with CLI 3-7
setting with GUI 3-8
Remote Setup Wizard
configuring the software
3-6
S
serial cable
characteristics
2-14
pin locations 2-14
pinout information 2-14
serial cable, connecting 2-12
setup utility
configuring the software
3-3
description 3-1
requirements 3-1
shipping box contents 2-6
snapshots, reserving space 4-2
SNMP, configuring 5-1
software configuration, methods 3-1
Spanning-Tree recommendation 2-3
switches
bandwidth requirement
2-11
Flow Control recommendation 2-3
Jumbo Frames recommendation
2-3
link recommendation 2-11
Spanning-Tree recommendation
2-3
unicast storm control
recommendation
2-3
VLAN recommendation 2-3
To Next Page
Loading...
Need help?
General
