3–Adapter Management Applications
Windows Management Applications
97 CU0354602-00 L
Figure 3-17 shows the Diagnostics page.
Figure 3-17. Diagnostics Tests on Windows
4. Under Diagnostic Tests, select one or more check boxes indicating the
tests you want to run: Hardware Test, Register Test, Interrupt Test,
Internal Loopback Test, External Loopback Test, and Link Test.
(“Windows Diagnostic Test Descriptions” on page 101 describes each test
type.)
5. Click Run Tests.
Only one test can run at a time. Multiple tests can run sequentially.
To Next Page
Loading...