100 Using Your Projector
Network Status
See OSD section on page 63.
IP Setup
• Choose Obtain an IP address automatically to assign an IP address to the
projector automatically, or Use the following IP address to assign an IP
address manually.
DHCP Server Setup
• Choose Auto to automatically set up the Start IP, End IP, Subnet Mask,
Default Gateway, and DNS Server address from a DHCP server, or Disable
to disable this function.
Wireless Setup
• Choose Enable to set up the Region, SSID, SSID Broadcast, Channel,
Encryption, and Key. Choose Disable to disable the wireless set up.
To Next Page
Loading...
