110 Using Your Projector
Managing the Projector From Web
Management (Network RJ45 Kit is Optional for
S320)
Configuring the Network Setting
If the projector is connected to a network, you can access the projector using a web
browser by configuring the network setting (TCP/IP). When using the network
function, the IP address should be unique. For configuring the network setting,
refer to "LAN Settings" on page 63.
The RJ45 kit is not shipped with your S320 projector. You can purchase it on the
Dell website at www.dell.com. See "Installing the Optional RJ45 Kit" on page 16.
Accessing Web Management
Use Internet Explorer 5.0 and above or Firefox 1.5 and above and enter the IP
address. You can now access Web Management and manage the projector from a
remote location.
To Next Page
Loading...
