Dell S320 - Page 123

Using Your Projector 123
Firewall Configuration and FAQ
Q: Why can’t I access the Web Management Page?
A: Your computer’s firewall configuration may prevent you from accessing the
Web Management Web Page. Please refer to the following configuration
settings:
Firewall Protection Configuration
McAfee Security
Center
1 Launch McAfee Security Center (Start > All
Programs > McAfee > McAfee Security Center).
2 On the personal firewall plus tab, click View the
Internet Applications List.
3 Find and select Dell S320 or S320wi Projector
from the list.
4 Right-click on its Permissions column.
5 Select Allow Full Access from the pop-up menu.
Norton AntiVirus 1 Open Norton AntiVirus (Start > All Programs >
Norton AntiVirus > Norton AntiVirus).
2 Click Options menu, then select Norton
AntiVirus.
3 On the Status page, select Internet Worm
Protection.
4 Find and select Dell S320 or S320wi Projector
from the list of programs.
5 Right-click on its Internet Access column.
6 Select Permit All from the pop-up menu.
7 Click OK.
Sygate Personal
Firewall
1 Open Sygate Personal Firewall (Start > All
Programs > Sygate > Sygate Personal Firewall).
2 From the Running Applications list, find and
right-click on Dell S320 or S320wi Projector.
3 Select Allow from the pop-up menu.