Dell S320 - Page 127

Troubleshooting Your Projector 127
Partial, scrolling, or
incorrectly displayed image
1 Press the Auto Adjust button on the
remote control or the control panel.
2 If you are using a Dell™ laptop computer,
set the resolution of the computer to
WXGA (1280 x 800):
a Right-click the unused portion of your
Microsoft
®
Windows
®
desktop, click
Properties, and then select Settings tab.
b Verify that the setting is 1280 x 800 pixels
for the external monitor port.
c Press (Fn+F8).
If you experience difficulty in changing
resolutions, or if your monitor freezes, restart
all the equipment and the projector.
If you are not using a Dell™ laptop computer,
see your documentation. If images are not
displayed properly, please upgrade the video
driver of your computer. For a Dell computer,
see support.dell.com.
The screen does not display
your presentation
If you are using a portable computer, press
(Fn+F8).
Image is unstable or flickering Adjust the tracking in the OSD Display
Settings of the Advanced Settings menu (in
PC Mode only).
Image has vertical flickering
bar
Adjust the frequency in the OSD Display
Settings of the Advanced Settings menu (in
PC Mode only).
Image color is incorrect • If the display receives the wrong signal
output from the graphics card, please set
the signal type to RGB in the OSD Image
Settings of the Advanced Settings tab.
•Use Test Pattern in the Projector Settings
of the Advanced Settings menu. Ensure
that the colors of the test pattern are
correct.
Problem
(continued) Possible Solution (continued)