Menu item Description
Tray 1 Renumber
O
Tray 2
Configures the printer to work with printer software or programs that use
dierent source assignments for trays, drawers, and feeders
Notes:
• O is the factory default setting.
• Tray 2 is displayed only when it is installed.
Auto CR after LF
On
O
Specifies whether the printer automatically performs a carriage return (CR)
after a line feed (LF) control command
Notes:
• O is the factory default setting.
• Settings are duplicated in the PCL Emulation menu.
Auto LF after CR
On
O
Specifies whether the printer automatically performs a line feed (LF) after
a carriage return (CR) control command
Notes:
• O is the factory default setting.
• Settings are duplicated in the PCL Emulation menu.
Understanding printer menus 130
To Next Page
Loading...
