13. Remove the display assembly.
14. Remove the power-adapter port.
15. Remove the power button with optional fingerprint reader.
16. Remove the system board - UMA or discrete, whichever applicable.
NOTE: The system board can be removed along with the heat sink.
About this task
The following image indicates the location of the palm-rest and keyboard assembly and provides a visual representation of the
removal procedure.
NOTE: The image is showing the palm-rest for aluminum chassis which has WLAN antennas attached to it.
NOTE:
For systems with an aluminum chassis, both the left and right RF metal brackets MUST be transferred to the replacement
palm-rest.
Removing and installing components 77
To Next Page
Loading...
