Next steps
1. Replace the display assembly
2. Replace the hard drive assembly
3. Replace the system fan
4. Replace the heatsink
5. Replace the SSD
6. Replace the WLAN
7. Replace the memory
8. Connect the battery cable to the connector on the system board.
9. Replace the base cover
10. Replace the optical drive assembly
11. Replace the SD memory card
12. Follow the procedure in after working inside your computer
Camera
Removing the camera
Prerequisites
1. Follow the procedure in before working inside your computer
2. Remove the SD memory card
3. Remove the optical drive assembly
4. Remove the base cover
5. Remove the battery
6. Remove the WLAN
7. Remove the SSD
8. Remove the hard drive assembly
9. Remove the system fan
72
Removing and installing components
To Next Page
Loading...
