Dell Vostro 3583 - Installing the Display Bezel

5. Remove the memory
6. Remove the WLAN
7. Remove the SSD
8. Remove the hard drive assembly
9. Remove the system fan
10. Remove the heatsink
11. Remove the display assembly
Steps
1. Pry the inner top side of the display bezel [1].
2. Continue to pry the inner left and inner right edges of the display bezel [2].
3. Pry up the bottom inner edge of the display bezel and lift the bezel off the display assembly [3].
Installing the display bezel
Steps
Align the display bezel with the display back-cover and antenna assembly, and then gently snap the display bezel into place [1].
66
Removing and installing components