Dell Vostro 5401 - Storage; Display

Table 4. Integrated device options (continued)
Option Description
● Enable USB Boot Support
● Enable External USB Port
By default, all the options are enabled.
Storage
Table 5. Storage options
Option Description
SATA Operation
Allows you to configure the operating mode of the integrated
SATA hard drive controller.
The options are:
● Disabled
● AHCI
● RAID On—By default, the RAID On option is enabled.
NOTE: SATA is configured to support RAID mode.
Storage Interface
Allows you to enable or disable various drives on board.
The options are:
● M.2 PCIe SSD-1
● M.2 PCIe SSD-0
By default, all the options are enabled.
SMART Reporting
This field controls whether hard drive errors for integrated drives
are reported during system startup. This technology is part of the
Self Monitoring Analysis and Reporting Technology (SMART)
specification. By default, the Enable SMART Reporting option is
disabled .
Drive Information
Provides information about drive type and device.
Display
Table 6. Display options
Option Description
Display Brightness
Allows you to set the screen brightness when running on battery
and AC power.
The options are:
● Brightness on battery power - By default, set to 50.
● Brightness on AC power - By default, set to 100.
Full Screen Logo
Displays full screen logo when the image matches screen
resolution.
By default, all the option is disabled.
100 System setup