Steps
Place the palm-rest and keyboard assembly on a flat surface.
Next steps
1. Install the system board.
2. Install the touchpad.
3. Install the DC-in port.
4. Install the power button with fingerprint reader.
5. Install the I/O board.
6. Install the coin-cell battery.
7. Install the heat sink.
8. Install the display assembly.
9. Install the speakers (3-cell battery configuration or 4-cell battery configuration).
10. Install the system fan.
11. Install the SSD-1 (M.2 2230 SSD card or M.2 2280 SSD card).
12. Install the SSD-2 .
13. Install the memory modules.
14. Install the WLAN card.
15. Install the battery (3-cell or 4-cell) based on the configuration.
16. Install the base cover.
17. Follow the procedure in after working inside your computer.
94
Disassembly and reassembly
To Next Page
Loading...
