Power-Supply Unit 113
3
Replace the screws that secure the power supply to the chassis.
WARNING: Failure to replace and tighten all screws may cause electrical shock
as these screws are a key part of the system grounding.
4
Connect the DC power cables to the system board and drives.
See "System-Board Components" on page 21.
Postrequisites
1
Replace the computer cover. See "Replacing the Computer Cover" on
page 25.
2
Follow the steps in "After Working Inside Your Computer" on page 15.
book.book Page 113 Wednesday, April 4, 2012 2:00 PM
To Next Page
Loading...
