mSATA Drive 57
12
mSATA Drive
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 13. For additional safety best practices information, see the Regulatory
Compliance Homepage at dell.com/regulatory_compliance.
Prerequisites
1
Remove the computer cover. See "Removing the Computer Cover" on
page 23.
Removing the mSATA Drive
1
Locate the mSATA slot (MSATA1) on the system board. See
"System-Board Components" on page 21.
2
Remove the screws that secure the mSATA drive to the system board.
3
Lift the mSATA drive away from the system-board connector.
book.book Page 57 Wednesday, April 4, 2012 2:00 PM
To Next Page
Loading...
