Mini-Card Antennas 55
Replacing the Mini-Card Antennas
1
Place the Mini-Card antennas in position and replace the screws that
secure the Mini-Card antennas to the top panel.
2
Route the Mini-Card antenna cables through the routing guides.
3
Connect the appropriate antenna cables to the WLAN card you are
installing. The WLAN card has two triangles marked on the label (black
and white):
• Connect the black cable to the connector marked with a black
triangle.
• Connect the white cable to the connector marked with a white
triangle.
Postrequisites
1
Replace the top cover. See "Replacing the Top Cover" on page 78.
2
Replace the front bezel. See "Replacing the Front Bezel" on page 33.
3
Replace the computer cover. See "Replacing the Computer Cover" on
page 25.
4
Follow the steps in "After Working Inside Your Computer" on page 15.
book.book Page 55 Wednesday, April 4, 2012 2:00 PM
To Next Page
Loading...
