Optical Drive(s) 69
Replacing the Optical Drive
1
Gently slide the optical drive into the optical-drive bay through the front
of the computer.
2
Align the screw holes on the optical drive with the screw holes on the
chassis.
3
Replace the screws that secure the optical drive to the chassis.
4
Connect the power and data cables to the optical drive.
Postrequisites
1
Replace the computer cover. See "Replacing the Computer Cover" on
page 25.
2
Replace the front bezel. See "Replacing the Front Bezel" on page 33.
Secondary Optical-Drive
Prerequisites
1
Remove the computer cover. See "Removing the Computer Cover" on
page 23.
2
Remove the front bezel. See "Removing the Front Bezel" on page 31.
book.book Page 69 Wednesday, April 4, 2012 2:00 PM
To Next Page
Loading...
