Media-Card Reader 75
Replacing the Media-Card Reader
1
Gently slide the Media-Card Reader guides into the slots in the top panel.
2
Replace the screws that secure the Media-Card Reader to the front panel.
3
Connect the Media-Card Reader cable to the system board connector
F_USB1. See "System-Board Components" on page 21.
Postrequisites
1
Replace the top cover. See "Replacing the Top Cover" on page 78.
2
Replace the optical drive. See "Replacing the Optical Drive" on page 69.
3
Replace the front bezel. See "Replacing the Front Bezel" on page 33.
4
Replace the computer cover. See "Replacing the Computer Cover" on
page 25.
5
Follow the steps in "After Working Inside Your Computer" on page 15.
1 Media-Card Reader guides (2) 2 slots (2)
3 top panel 4 Media-Card Reader
5 screws (2) 6 front panel
book.book Page 75 Wednesday, April 4, 2012 2:00 PM
To Next Page
Loading...
