Chassis Fan 95
Replacing the Chassis Fan
1
Align the screw holes on the chassis fan with the screw holes on the chassis.
2
Replace the screws that secure the chassis fan to the chassis.
3
Connect the chassis fan cable to the system board connector SYS_FAN1.
See "System-Board Components" on page 21.
Postrequisites
1
Replace the computer cover. See "Replacing the Computer Cover" on
page 25.
2
Follow the steps in "After Working Inside Your Computer" on page 15.
book.book Page 95 Wednesday, April 4, 2012 2:00 PM
To Next Page
Loading...
