Memory Module(s) 29
1
Align the notch on the bottom of the memory module with the tab on the
memory-module connector.
CAUTION: To avoid damage to the memory module, press the memory module
straight down into the connector while you apply equal force to each end of the
memory module.
2
Insert the memory module into the memory-module connector until the
memory module snaps into position and the securing clip locks in place.
1 memory module 2 notch
3 tab 4 cutouts (2)
1 securing clip (snapped in position)
1
2
4
3
1
book.book Page 29 Wednesday, April 4, 2012 2:00 PM
To Next Page
Loading...
