Delta AH Series User Manual

Chapter 9 Troubleshooting
9-65
9_
Error Code
Description
Corrective action
16#9B29
An error occurs when COM2
communicates with slave 9 by
MODBUS.
1. Check the communication setting between the connecting
devices.
2. Check if the communication cable is damaged.
16#9B2A
An error occurs when COM2
communicates with slave 10 by
MODBUS.
1. Check the communication setting between the connecting
devices.
2. Check if the communication cable is damaged.
16#9B2B
An error occurs when COM2
communicates with slave 11 by
MODBUS.
1. Check the communication setting between the connecting
devices.
2. Check if the communication cable is damaged.
16#9B2C
An error occurs when COM2
communicates with slave 12 by
MODBUS.
1. Check the communication setting between the connecting
devices.
2. Check if the communication cable is damaged.
16#9B2D
An error occurs when COM2
communicates with slave 13 by
MODBUS.
1. Check the communication setting between the connecting
devices.
2. Check if the communication cable is damaged.
16#9B2E
An error occurs when COM2
communicates with slave 14 by
MODBUS.
1. Check the communication setting between the connecting
devices.
2. Check if the communication cable is damaged.
16#9B2F
An error occurs when COM2
communicates with slave 15 by
MODBUS.
1. Check the communication setting between the connecting
devices.
2. Check if the communication cable is damaged.
16#9B30
An error occurs when COM2
communicates with slave 16 by
MODBUS.
1. Check the communication setting between the connecting
devices.
2. Check if the communication cable is damaged.
16#9B31
An error occurs when COM2
communicates with slave 17 by
MODBUS.
1. Check the communication setting between the connecting
devices.
2. Check if the communication cable is damaged.
16#9B32
An error occurs when COM2
communicates with slave 18 by
MODBUS.
1. Check the communication setting between the connecting
devices.
2. Check if the communication cable is damaged.
16#9B33
An error occurs when COM2
communicates with slave 19 by
MODBUS.
1. Check the communication setting between the connecting
devices.
2. Check if the communication cable is damaged.
16#9B34
An error occurs when COM2
communicates with slave 20 by
MODBUS.
1. Check the communication setting between the connecting
devices.
2. Check if the communication cable is damaged.

Delta AH Series Specifications

General

Brand	Delta
Model	AH Series
Category	Controller
Language	English