AS Series Operation Manual
Revision History
st
The first version was published.
2
nd
1.Added new models AS08AD-B, AS08AD-C and
UB-10-IO32D product information.
2.Updated module weights.
3.Updated Emergency Request Message information
2018/02/09
rd
1.Chapter 2: Specification Corrections
4
th
1.Updated new models AS08AD-B/C, AS02/04PU-A,
AS320T/P-B, AS300N-A, AS228R/T/P-A,
AS218RX/TX/PX-A, AS06RTD-A, AS08TC-A, AS-FEN02
and AS01DNET-A product information
2.Chapter 9: Updated operation and monitor on the
webpage in section 9.10
3.Chapter 10: Updated AS200 series information
2018/09/25
5
th
1.Updated digital output specifications in section 1.1.2.
2.Added specification of ambient air.
temperature-barometric pressure-altitude in section 2.1.
3.Added specifications of program capacity (step) and
Ethernet in section 2.2.1.
4.Added specifications of input impedance and leakage
current in section 2.2.2.
5.Added specifications of digital conversion range and
update input impedance for 04DA/06XA.
6.Added a note for the function specification in section
2.5.1.
7.Updated specifications of input impedance in section
2.9.1.
8.Updated the cable specification image in section 4.2.1.
9.Updated the contents of initializing a memory card in
section 7.4.1 and added root directory of the memory
card in sections 7.6, 7.8 and 7.9.
10.Added an example of Daylight Saving Timing in section
8.2.2.1.
11.Added specification for AS-FEN02 in section 9.3.1 and
9.3.2.
12.Updated EIP Scanner/Adapter and data mapping
information, EIP Builder operations in section 9.4.
13.Updated assembly object, TCP/IP interface object and
Ethernet link object in section 9.8.
14.Added new EIP products in the EIP product list in
section 9.9.
15.Updated operation and monitor on the web information
in section 9.10.
16.Added AS200 series descriptions as well as application
examples and updated CANopen introduction as well
2019/1/11
To Next Page
Loading...