AS Series Operation Manual
1-12
1.3 Characteristics
Characteristics of the AS series CPU module:
(1) High efficiency
The AS Series CPU module uses a 32-bit high-speed processor. The module executes basic
instructions at 25 ns each and moving instructions at 150ns each. The module executes instructions
at a speed of 40k steps/ms (40% of the instructions are basic instructions, and 60% of the
instructions are applied instructions).
The CPU of the AS Series uses the Soc architecture, built with six (or 3) high speed counters. The
maximum frequency is 200 kHz for each counter (differential output models can reach 4 MHz); six-
axis high speed position output at 200 kHz (differential output models can reach 4 MHz).
(2) Supporting more inputs and outputs
The AS series CPU module supports up to 1024 digital I/Os or 32 I/O modules (any type) or 16
analog I/O modules.
The AS series works with SCM/DNETcommunication modules (AS-FCOPM, and AS-FEN02 included)
to create a remote connection, and you can connect up to 15 remote modules.
Note: For the connections between the CPU modules and the remote modules, the I/O points cannot
exceed 1024 I/Os, 32 I/O modules (any type), or 16 analog I/O modules.
(3) Multiple I/O modules
The AS series CPU module supports the following I/O modules: digital input/output modules, analog
input/output modules, temperature measurement modules, positioning/counter modules, network
modules, and function cards.
Module Description
Digital
input/output
module
AS08AM10N-A, AS08AN01T-A, AS08AN01P-A, AS08AN01R-A,
AS16AM10N-A, AS16AN01T-A, AS16AN01P-A, AS16AN01R-A,
AS16AP11T-A, AS16AP11P-A, AS16AP11R-A, AS32AM10N-A,
AS32AN02T-A, AS64AM10N-A, AS64AN02T-A
To Next Page
Loading...