Delta C2000 Plus Series User Manual

Chapter 8 Option CardsC2000 Plus
8-30
8-10-2 EMC-PG01R Wiring Diagram

Use a shielded cable to prevent interference. Do not run control wires parallel to any high voltage
AC power line (200 V
AC
and above).

Recommended wire size 0.2–0.75 mm
2
(24–18 AWG).

Cable length: PG1 input, less than 30m; PG2 single-phase input, less than 30 m / two-phase input,
less than 100 m.

Delta C2000 Plus Series Specifications

General

Brand	Delta
Model	C2000 Plus Series
Category	DC Drives
Language	English