IV
2. Use other methods, such as heat treatment or any other non-fumigation treatment, to
deworm the wood packaging material.
3. If you use heat treatment to deworm, leave the packaging materials in an
environment of over 56°C for a minimum of thirty minutes.
Connect the drive to a three-phase three-wire or three-phase four-wire Wye system to
comply with UL standards.
If the motor drive generates leakage current over AC 3.5 mA or over DC 10 mA on a
grounding conductor, compliance with local grounding regulations or IEC61800-5-1
standard is the minimum requirement for grounding.
NOTE: The content of this manual may be revised without prior notice. Please consult our distributors or
download the latest version at http://www.deltaww.com/iadownload_acmotordrive
To Next Page
Loading...
