Delta C2000 Plus Series User Manual

Chapter 14 Fault Codes and DescriptionsC2000 Plus
14-54
ID* Display on LCD Keypad Fault Name Fault Descriptions
51
External base block
(bb)
When the contact of MIx = bb
is ON, the output stops
immediately and displays bb on the keypad.
The motor
is in free running.
Action and Reset
Action condition MIx = bb and the MI terminal is ON
Action time Act immediately
Fault treatment parameter N/A
Reset method The display “bb” is automatically cleared after the fault is cleared.
Reset condition N/A
Record No
Cause Corrective Actions
When Mix = bb activates
Verify if the system is back to normal condition, and then press “RESET”
key to
go back to the default.

Delta C2000 Plus Series Specifications

General

Altitude	Up to 1000m without derating
Communication	CANopen
Output Current	2.5A
Protection Features	Overcurrent, Overvoltage, Overtemperature
Operating Temperature	-10°C to 50°C
Storage Temperature	-20°C to 60°C
Humidity	95% RH (non-condensing)