Delta CMM-EC02 - Operation Example; Delta PLC-AX-8 Operation Example (Designer-AX (Codesys Base))

7. Operation Example
7.1 Delta PLC-AX-8 Operation Example (Designer-AX (Codesys base))
Equipment
AX-8 GLAN1 IP: 192.168.0.10
Computer Network card IP: 192.168.0.123
Motor drive: M300
Communication card: CMM-EC02
Software DIADesigner-AX V1.1.0 and above
1. Connect CMM-EC02 to AX-8 EtherCAT port. Then Connect the AX-8 to the Computer via Ethernet
port (GLAN1)
2. Run DIADesigner-AX software, then click on New Project
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com