Delta CP2000 Series User Manual

Chapter 12 Description of Parameter SettingsCP2000
12.1-12-13
 Disable Motor’s Output
Set the multi-function input commands to Disable Motors’ Output can stop the corresponding
motors.
The settings are:
Pr.02-01–Pr.02-06= 60 61 62 63 64 65 66 67 68
Disable Motor’s Output ALL 1 2 3 4 5 6 7 8
When a motor’s output is disabled, this motor coasts to stop.
 Wiring: Fixed Quantity Control can control up to eight motors. Diagram 12-12 is an example of
controlling four motors at the same time.
R S T
Contactor
M1
L N
M0
Contactor
M2
Contactor
M3
Contactor
M4
U V W
RA2
RC2 RA1 RB 1 RC1
MO3
MO2 MO1 RA3 RC3 MO 6 MO 5 MO 4
R6AA
V
FD-CP2000
Diagram 12-12

Delta CP2000 Series Specifications

General

Output Voltage	0 ~ Input Voltage
Communication Interface	RS-485
Storage Temperature	-20°C to 60°C
Input Voltage	200-240V AC, 380-480V AC
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit