Chapter 6 : SNMP Device Firmware Upgrade
68
Chapter 6 : SNMP Device Firmware Upgrade
With the provided program EzSetting, you can effortlessly perform a firmware
upgrade for SNMP devices via LAN. Please refer to the following instructions.
Step 1 The subnet mask allows you to refine the device discovery range in the
specified subnets. Make sure the SNMP device you wish to upgrade is in
the subnet that is specified. If it is not, please modify the subnet and
subnet mask.
Step 2 Click Discover. A list of SNMP devices is shown.
To Next Page
Loading...
